ORTH60-301GW EPON ONU (C22)
ORTH60-301GW is fiber to the home multi service access EPON ONU. It’s based on the mature, stable, high cost performance EPON technology and has gigabit Ethernet switching, WDM and HFC technology. ORTH60-301GW has a higher bandwidth, higher reliability, easy management and good quality of service (QoS) guarantee with technical performance of equipment meet the IEEE802.3ah requirements and have good compatibility with third party manufacturers OLT.
EPON technology is a kind of emerging technology which takesadvantage of PON technology and Ethernet technology also is a kind of point tomulti-point network technology. OLT through the passive optical network toconnect multiple ONU with single fiber bidirectional technical can rarely usefiber resources to meet the operators of the multi-user access requirements.
It adopts single fiber WDM technology with downlink wavelength 1550nmand 1490nm, uplink wavelength 1310nm. It only needs one-core fiber to transmitdata and CATV service.
ORTH60-301GW can integration wireless function with meet 802.11 n/b/g technical standards. It has built-in high gain directional antenna, the wireless transmission rate up to 300Mbps. It has the characteristics of strong penetrating power and wide coverage. It can provide users with more efficient data transmission security.
2.1 Support port-based rate limitation and bandwidth control
2.2 In compliant with IEEE802.3ah Standard
2.3 Wi-Fi series meet 802.11 n/b/g technical standards
2.4 Up to 20KM transmission Distance
2.5 Support data encryption, group broadcasting, port Vlan separation, etc.
2.6 Support Dynamic Bandwidth Allocation (DBA)
2.7 Support ONU auto-discovery/Link detection/remote upgrade of software
2.8 Support port mode of VLAN configuration
2.9 Support power-off alarm function, easy for link problem detection
2.10 Support broadcasting storm resistance function
2.11 Support port isolation between different ports
2.12 Support port flow control
2.13 Support ACL and SNMP to configure data packet filter flexibly
2.14 Specialized design for system breakdown prevention to maintain stable system
2.15 Support software online upgrading
2.16 EMS network management based on SNMP, convenient for maintenance
Indicator | Description | ||
1 | CATV | CATV status | On:CATV optical normal Off:The CATV signals are not received |
2 | WIFI | WIFI | Blinking:Data is being transmitted On:Wi-Fi function Open Off: Wi-Fi function Close |
3 | LAN | LAN port status | On: Ethernet connection is normal Blinking: Data is being transmitted through the Ethernet port Off: Ethernet connection is not set up |
4 | LOS | EPON optical signals | On: Optical power lower than receiver sensitivity; Off: Optical in normal |
5 | PON | ONU Register | On: Success to register to OLT Blinking: In process of registering to OLT Off: Failed to register to OLT; |
6 | PWR | Power status | On: The ONU is power on Off: The ONU is Power off |
Item | Parameter |
PON Interface | 1 EPON optical interface |
User Ethernet | 1*10/100/1000M auto-negotiation Full/half duplex mode 1 RF output Female F-Type Connector |
Power Interface | 12V DC Power supply |
PON Optical Parameter | Wavelength: Tx 1310nm, Rx1490nm |
Data Transmission | PON Throughput: Downstream 980Mbps; Upstream 950Mbps |
Business | Layer 2 wire speed switching Support VLAN TAG/UNTAG,VLAN translation Support Port-based speed limitation Support Priority classification Support storm control of broadcast Support loop detection |
Network | Support IEEE802.3 QAM, ONU can be remotely managed by OLT Support Remote management through SNMP and Telnet Local management |
Management | Status monitor, Configuration management, Alarm management, |
Shell | Plastic casing |
Power | Power consumption: <6.5W |
Physical | Item Dimension:160mm(L)*140mm(W)*29mm(H) Item weight:0.2kg |
Environmental | Operating temperature: 0 to 50oC |
Item | Parameter |
Wavelength | 1550nm |
Optical return loss | >45dB |
Input optical power | -18dBm~0dBm |
RF frequency | 47MHz~1000MHz |
RF output lever | 78dBuV (@-12~-2dBm@85MHz) |
CNR | >41dB (@-10dBm@DS22 Channel) |
CSO | >60dBc (@-10dBm@DS22 Channel) |
CTB | >60dBc (@-10dBm@DS22 Channel) |
RF output return loss | >12dB |
RF impedance | 75Ω |
AGC function | Support |
Item | Parameter | |
Performance parameters | Operating Mode | Router or bridge |
Antenna gain | 5dBi | |
Throughput | IEEE 802.11b: 11Mbps IEEE 802.11g: 54 Mbps IEEE 802.11n: 300Mbps | |
Frequency | 2.412 ~ 2.472 GHz | |
Channel | 13*Channel, configurable to meet the standard of USA, Canada, Japan and China | |
Modulation | DSSS , CCK and OFDM | |
Coding | BPSK, QPSK, 16QAM and 64QAM | |
RF receive sensitivity | 802.11b: -83dBm @ 1 Mbps; -80dBm @ 2 Mbps; -79dBm @ 5.5 Mbps; -76dBm @ 11 Mbps 802.11g: -85dBm @ 6 Mbps; -84dBm @ 9 Mbps; -82dBm @ 12 Mbps; -80dBm @ 18 Mbps; -77dBm @ 24 Mbps; -73dBm @ 36 Mbps; -69dBm @ 48 Mbps; -68dBm @ 54 Mbps 802.11n 20MHz: -74dBm @ 65 Mbps; -70dBm @ 130 Mbps; 802.11n 40MHz: -70dBm @ 135 Mbps; -67dBm @ 300 Mbps; | |
RF output lever | 802.11b: 17 ±0.5dBm @11Mbps 802.11g: 15 ±0.5dBm @ 54 Mbps; 16 ±0.5dBm @ 48 Mbps; 17 ± 1dBm @ 6 ~ 36 Mbps 802.11n 20MHz: 14 ± 0.5dBm @ 130 Mbps; 15 ± 0.5dBm @ 78 Mbps; 18 ± 0.5dBm @ 6.5 Mbps 802.11n 40MHz: 14 ± 0.5dBm @ 300 Mbps; 15 ± 0.5dBm @ 162 Mbps; 18 ± 0.5dBm @ 13.5 Mbps | |
Encryption Mode | 802.11i security: WEP-64/128, TKIP (WPA-PSK) and AES (WPA2-PSK) |
Typical Solution:FTTH, FTTO
Typical Business:INTERNET, IPTV, VOD, IP Camera, WIFI
Product Name | Product Model | Descriptions |
1GE+CATV+WIFI Single fiber | 1*10/100/1000M Ethernet interface, 1 RF Interface,1 EPON interface, built-in FWDM, Input optical power -18dBm~0dBm, support Wi-Fi function and AGC function, Plastic casing, external power supply adapter |