中国怎么下载binance

ORTH60-311G(C22)返回

ORTH60-311G EPON ONU(C22)


 

1.    Product Overview

ORTH60-311G is fiber to the home multi service accessEPON ONU. It’s based on the mature, stable, high cost performance EPON technology and has gigabit Ethernet switching and HFC technology. ORTH60-311G has a higher bandwidth, higher reliability, easy management and good quality of service (QoS) guarantee with technical performance of equipment meet the IEEE802.3 ah requirements and have good compatibility with third party manufacturers OLT.

EPON technology is a kind of emerging technologywhich takes advantage of PON technology and Ethernet technology also is a kind of point to multi-point network technology. OLT through the passive optical network to connect multiple ONU with single fiber bidirectional technical can rarely used fiber resources to meet the operators of the multi-user access requirements.

It adopts dual fiber WDM technology with downlink wavelength1490nm, uplink wavelengths. It only needs one-core fiber to transmit data service. It also has an HFC optical port, received the CATV optical signals and convert into electric CATV signals.

2.    Feature

2.1 Support port-based rate limitation and bandwidth control

2.2 Incompliant with IEEE802.3ah Standard

2.3 Up to 20KM transmission Distance

2.4 Support data encryption, group broadcasting, port Vlan separation, etc.

2.5 Support Dynamic Bandwidth Allocation (DBA)

2.6 Support ONU auto-discovery/Link detection/remote upgrade of software

2.7 Support port mode of VLAN configuration

2.8 Support power-off alarm function, easy for link problem detection

2.9 Support broadcasting storm resistance function

2.10 Support port flow control

2.11 Support ACL and SNMP to configure data packet filter flexibly

2.12 Specialized design for system breakdown prevention to maintain stable system

2.13 Support software online upgrading

2.14 Ems network management based on SNMP, convenient for maintenance 

 3.    Product Interface and LED Definitions



Indicator

Description

1

PWR

Power status

On: The ONU is power on

Off: The ONU is Power off

2

CATV

CATV status

OnCATV optical normal

OffThe CATV signals are not received

3

LAN

LAN port status

On: Ethernet connection is normal

Blinking: Data is being transmitted through the Ethernet port

Off: Ethernet connection is not set up

4

LOS

EPON optical signals

On: Optical power lower than receiver sensitivity ;

Off: Optical in normal

5

PON

ONU Register

On: Success to register to OLT

Blinking: In process of registering to OLT

Off: Failed to register to OLT;

 

4.    Specification

Item

Parameter

Uplink Interface

1 EPON optical interface
Meet 1000BASE-PX20+ standard
Symmetric 1.25Gbps upstream/downstream
SC single-mode fiber
split ratio: 1:64
Transmission distance 20KM

CATV Interface:1 HFC Optical input, SC/APC

User Ethernet
Interface

1*10/100/1000M auto-negotiation

Full/half duplex mode
RJ45 connector
Auto MDI/MDI-X
100m distance

1 RF output

Female F-Type Connector

Power Interface

12V DC Power supply

PON

Optical

Parameter

Wavelength: Tx 1310nm, Rx1490nm
Tx Optical Power: 0
4dBm
Rx Sensitivity: -27dBm
Saturation Optical Power: -3dBm

Data Transmission
Parameter

PON Throughput: Downstream 980Mbps; Upstream 950Mbps
Ethernet: 1000Mbps
Packet Loss Ratio: <1*10E-12
latency: <1.5ms

Business
Capability

Layer 2 wire speed switching

Support VLAN TAG/UNTAGVLAN translation

Support Port-based speed limitation

Support Priority classification

Support storm control of broadcast

Support loop detection

Network
Management

Support IEEE802.3 QAM, ONU can be remotely managed by OLT

Support Remote management through SNMP and Telnet

Local management

Management
Function

Status monitor, Configuration management, Alarm management,
Log management

Shell

Plastic casing

Power

<5W12V/0.5A power supply adapter

Physical
Specifications

Item Dimension160mm(L)*120mm(W)*32mm(H)

Item weight0.3kg

Environmental
Specifications

Operating temperature: 0 to 50oC
Storage temperature: -40 to 85oC
Operating humidity: 10% to 90%(Non-condensing)
Storage humidity: 10% to 90%(Non-condensing)

5.    CATV

Item

Parameter

Wavelength

1550nm

Optical return loss

>45dB

Input optical power

-18dBm0dBm

RF frequency

47MHz~1000MHz

RF output lever

78dBuV (@-12~-2dBm@85MHz)

AGC control accuracy

<±1db

Flatness

<±1.5db

CNR

                                    >41dB (@-10dBm@DS22 Channel)

CSO

>60dBc (@-10dBm@DS22 Channel)

CTB

>60dBc (@-10dBm@DS22 Channel)

RF output return loss

>14dB

RF impedance

75Ω

AGC function

Support

 

6.    Network Application

Typical SolutionFTTH

Typical BusinessINTERNET

7.    Ordering Information

Product Name

Product Model

Descriptions

1GE+CATV

Double Fiber

ORTH60-311G

1*10/100/1000M Ethernet interface,1 EPON interface, 1 HFC optical interface, 1 RF interface, Input optical power-18dBm0dBm, support AGC function, Plastic casing, external power supply adapter